Red Bay Banks
CONTRACT AGREEMENT
, ~If ,-
AGREEMENT, MADE THIS L day of (-_~
2003, by and
between, Spirit Marine Towing & Assistance ("Contractor "), and the BOARD OF
COUNTY COMMISSIONERS OF MONROE COUNTY, FLORIDA, of the County of
Monroe, State of Florida (Board).
The Contractor and the Board, for the consideration named, agree as follows:
1. The Contractor shall furnish all the materials for the installation of seven Danger
markers in the vicinity of the Red Bay Banks area, middle Keys, Monroe County as
specified by the list and map attached as exhIbit A.
2. The work performed under the Contract shall commence immediately from the
date the Liaison provides the Notice to Proceed and shall be completed by May 31,2003.
3. The Contractor understands the rules and procedures instituted by the Board to
ensure an orderly progress to the project. The Contractor understands both the intent and
the requirements of the Specifications attached as Exhibit B.
4. The Board shall pay the Contractor the total sum of$ 14.898.00 for the work
listed in Exhibit A and this Contract. Payment shall be upon completion by the Contractor
and review and approval of the close out documentation by the Marine Projects
Coordinator.
5. The attached List, Map, and Specifications together with this Agreement form
the Contract. They are fully a part of this Contract as ifrepeated herein verbatim.2; r:J
~5 ~::
oC?-
r;:~:~
O' .-
;~~~:
-*-. r.,
;:g~i
r-"" C-"~
:> rq
1',)
, C> ."
:>
, ,) r
" rrl
ri't CJ
C,O
:'v -'1
co <=>
;:0
~ :::0
fT1
t,O (J
CJ
( .'-) ::::C'
\,c.' 0
6. The Contractor covenants and agrees to indernni:fY and hold harmless Monroe
County Board of the County Commissioners from any and all claims for bodily injury
(including death), personal injury, and the property damage
(including property owned by Monroe County) and other losses, damages, and expenses
(including attorney's fees) which arise out of, in connection with, or by reason of services
provided by the Contractor or any of its subcontractor(s) in any tier, their employees or
agents. The purchase of the insurance required in the paragraph 11 does not vitiate this
indemnification provision.
7. The Contractor acknowledges his/ her intention to comply with the need to
coordinate all work with the appropriate environmental agencies, the U.s. Coast
Guard, and the County.
8. The Contractor agrees to supply the County with a set of photographs of the
complete work along with a letter certifYing completion of work.
The Contractor will be responsible for the camera, film, and development costs.
The Contractor also agrees to provide transportation for the Liaison to inspect the
completed work.
9. The Contractor understands and agrees that no payment will be made for this
project without required photographs and written certification of completion.
10. Due to the use of heavy equipment and, at times, dangerous work
environment, the Contractor understands and agrees to maintain an alcohol and drug free
work environment.
11. The CONTRACTOR will be responsible for all necessary insurance coverage
as indicated by the an "X" on the attached forms of Exhibit C identified as General
Insurance Requirements and INSKLST 1-4, as further detailed on forms WCI, WCJA,
GLI, & WLI. All policies must list Monroe County as additional insured with the
exception or the Workers Compensation policy.
12. The Contractor warrants that it has not employed, retained or otherwise had
act on its behalf any former County officer or employee subject to the prohibition of
Section 2 of Ordinance No. 010-1990 or any County officer or employee in violation of
Section 3 of Ordinance No. 020-1990. For breach or violation ofthis provision, the
owner may, in its discretion, terminate this contract without liability and may also, in its
direction, terminate this contract without liability and may also, in its discretion, deduct
from the contract or purchase price, or otherwise recover the full amount of any fee,
commission, percentage, gift, or consideration paid to the former County officer or
employee.
13. A person or affiliate who has been placed on the convicted vendor list
following a conviction for public entity crime may not submit a bid on a contract to
provide any goods or services to a public entity, may not submit a bid on a contract
with a public entity for the construction or repair of a public building or public work, may
not submit bids on leases real property to a public entity, may not be awarded or perform
work as a contractor, supplier, subcontractor, or consultant under a contract with any
public entity in excess of the threshold amount provided in Section 287.017, for
CATEGORY TWO ($10,000.00) for a period of36 months from the date of being
placed on the convicted vendor list.
14. The Board may terminate this Agreement with or without cause at any time
upon giving the Contractor up to 10 days notice in writing. The Contractor, upon receipt
of the notice, shall immediately cease work. The Board must pay the Contractor the
percentage of the contract price which is satisfactory to the Board up to date the
contractor received the notice of termination.
14. This Contract is governed by the laws of the State of Florida. Venue for any
litigation arising under this contract must be in Monroe County.
IN WITNESS WHEREOF the parties here to have executed this agreement by the
day and year first written above.
BOARD OF COUNTY COMMISSIONERS
GE, CLERK OF MOm;07'~~UNlY2 FLORID/- ~
BY: "y.~/u. /n ~
Mayor/Chairman
BY:
Witness: ~ 7//~
w~s:J%!i ~
R. i/V €
APPROVED
A AS TO FORM
C
ROBERT
DATE~
EXHIBIT A
County of Monroe
DeDartment of Marine Resources
2798 Overseas Highway, Suite 420
Marathon, Florida 33050
Phone: (305) 289-2805
FAX: (305) 289-2536
Board of County Commissioners
Mayor Dixie Spehar, Dist. I
Mayor Pro Tern Murray Nelson, Dist. 5
Comm. Charles "Sonny" McCoy, Dist. 3
Comm. George Neugent, Dist. 2
Comm. David Rice, Dist. 4
December 6, 2002
To:
From:
Re:
Kim McGee, Marine Projects Coordinator
Richard Jones, Marine Resources Planner
Installation of regulatory markers in the Red Bay Banks vicinity
As part of the Channel Marking Master Plan for the Florida Keys the Department is moving
ahead with the installation of shoal markers in the vicinity of Red Bay Banks (including Knight
Key Bank and Pigeon Key Bank). I have received all necessary permits to begin the
installations.
Please send out the attached Scope of Work to obtain price quotes for these installations.
Scope Of Work
For Installation of Danger Markers at Red Bay Banks Vicinity
A system of shoal markers is being implemented for the Red Bay Banks vicinity in the middle
Keys, just north of the Seven Mile Bridge. The project entails the installation of seven (7)
standard size wood pilings (12" diameter) with danger signs (standard 3'x3' diamonds). The
contractor shall provide all materials and supplies unless otherwise indicated. Monroe County
will provide all piling caps. See attached color GIS map for marker locations.
Location
Red Bay Bank
Work to be performed
Install four markers, each with four signs. reading:
DANGER SHOAL
Pigeon Key Bank
Install two markers, each with three signs. reading:
DANGER SHOAL
Knights Key Bank
Install one marker, with three signs. reading:
DANGER SHOAL
. Contractors should contact Richard Jones (289-2805) for any questions regarding hanging 3 or
four signs on a pile.
Contractors should refer to the attached Monroe County Specifications sheets for more detailed
information regarding. specifications of marker construction and installation. Contractors must
coordinate the installations with Richard Jones, Marine Resources Planner (305 289-2805), to
ensure that all work is performed satisfactorily.
~.
.. "'It
:= . J'-
0
~ , -
.r; ~
... .~>-c
~I I ~~&f
-ca
u
.- :E
>-
-ca
CDO ~
C.c N C N
len ~ tV
l:D
.cl. ~
U& l:D
I.C i .
CDca NIl
Be a::
:E'C
CD
II)
0
Q. .....
e
a.
.....
~ ~~ ...~
I
"'.
\ .,
w JI ..
(!) C CD \
<( O~'
.- "-
~ tsm
<( 2~
0 --
tn-
en .em
en O~
(2111 "0 en
CD"-
(!) , , tnCD
00)
ti5 -a, "0 ~ Q.C
.- CD 0 em
en:I:~..J a..e.
JI
EXHIBIT B
MONROE COUNTY
Specifications For the RepairlReplacementlInstallation of
Aids to Navigation, Regulatory Markers, and Information Markers
(updated 04/15/02)
For all pilines:
. Pilings shall be of timber treated with chromated copper arsenate (C.C.A.).
. Pilings shall be of timber which will withstand the driving for which they are intended.
. A straight line drawn from the center of the butt to the center of the tip shall not at any
point face further away from the center of the pile than a distance equal to 1 % of the
length of the pile.
. Piles to be sufficient length to provide a minimum of four foot penetration into hard
bottom or further penetration into other substrate so as to provide suitable permanent
holding. The base of the dayboard must be eight feet above mean high water.
. Black, cone head, round piling caps of the appropriate size should be mounted atop the
piling using four stainless #6 nails (this includes all sign replacements).
. Any pilings replaced will be removed and properly disposed of.
For all siens:
. Signage to be constructed of .125 gauge aluminum.
. Signage must be USCG approved.
. All signs should be pre-made (text, borders, etc.) by a County approved manufacturer.
. Signs should be mounted so that the piling is not visible above the signs.
. Signs for both standard (10m nominal range) and smaller size (Y2 mile nominal range)
markers should be mounted such that the bottom of the sign is 8' above the water (MHW)
. Hardware should all be stainless steel, including: 3/8" all-thread and 3/8" lag screws,
1 W' (o.d.) flat washers and 3/8" nuts. 1 W' (o.d.) plastic or nylon (or similar material)
washers shall also be used to separate the aluminum signs from the stainless steel flat
washers and nuts.
................................... ...................................................................................................................... ..........
1
Standard size markers: Signs for these markers have a 1 nm nominal range. The standard size
for such signs is- 3' x 3' green square, 4' x 4' red triangle, 3' x 3' diamond (danger), and 4' x 3'
regulatory, and information signs. 12" diameter pilings (approximately) will be used for all
standard size sign installations.
For standard size signs mounted at the top of standard size pilings:
A 12" long 2" x 4" pressure treated backing board should be installed horizontally 2"
below the top of the piling (to provide room for the piling cap) and attached to the piling
with four stainless #16 ring shank nails to prevent the board from rotating. The board
will be beveled to provide a flat surface for the downward angle of the sign. The board
will be installed so as to mount the signs to the appropriate approach angle of the marker
route. For extreme angles, signs should be mounted one below the other to allow for the
angle overlap (in which case all-thread on the sides would not be used).
Two lag screws and two all-threads will be used to mount the signs. One lag screw (4"
long) will be installed at the top of the sign, through the backing board and into the
piling. The other lag screw (3" long) will be installed at the bottom of the sign into the
piling. The two all-threads will be installed on the sides of the signs. Washers and nuts
are to be used, both in front and back of the signs, to assist with adjusting the approach
angle and ensure proper stiffness of the sign assembly.
For standard size regulatory and information signs mounted below standard size lateral aid signs:
The 4' x 3' signs should be mounted 4 inches below the lateral aid sign, using a beveled
12" long pressure treated 2"x4" for added support (attached with four stainless #16 ring
shank nails). Signs should be attached using a 4" lag screw with washers at the top and
3" lag screw at the bottom. An all-thread will be installed at each side of the signs (if
applicable). Washers and nuts are to be used, both in front and back of the signs, to assist
with adjusting the approach angle and ensure proper stiffness of the sign assembly.
Smaller size markers: For certain situations smaller size signs should be used (this will be
indicated on the work order). These signs will have a Yz nm nominal range. The standard size
for such signs is- 1 Yz' x 1 ~' square green, 2' x 2' red triangle, and 3' x 2' regulatory and
information signs. 9" diameter pilings will be used for all small size marker installations.
For smaller size lateral aid signs:
Signs should be mounted flat against the piling using two 3" long lag screws with
washers, one at the top and one at the bottom of the sign.
For smaller size regulatory and information signs:
A 12" long beveled 2" x 4" pressure treated backing board should be installed
horizontally 2" below the top of the piling (to provide room for the piling cap) and
attached to the piling with four stainless #16 ring shank nails. One lag screw (4" long)
will be installed at the top of the sign, through the backing board and into the piling. The
other lag screw (3" long) will be installed at the bottom of the sign into the piling. If
mounted beneath a lateral aid sign, a space of 4" should be provided.
2
EXHIBIT C
1996 Edition
MONROE COUNTY, FLORIDA
INSURANCE CHECKLIST
FOR
VENDORS SUBMItTING PROPOSALS
FOR'VORK
To assist in the development of your proposal, the insurance coverages marked with an "X" will
be required iri the event an award is made to your firm. Please review this form 'with your
insurance agent and have him/her sign it in the place provided. It is also required that the bidder
sign the form and submit it with each proposal. .
\VORKERS' COMPENSA TrON
AND
EMPLOYERS'LIABILITY
WC1
WC2
WC3
WCUSLH
X Workers' Compensation
X Employers Liability
Employers Liability
Employers Liability
US Longshoremen &
Harbor Workers Act
X Federal Jones Act
Statutory Limits
$100,000/$500,000/$100,000
$300,000/$500,000/$500,000
$1,900,000/$1,000,000/$1,000,000
Same as Employers'
Liability
Same as Employers'
Liability
\VCJA
INSCKLST 1
Administration Instruction
#4709.2
1996 Edition
GENERAL LJABTLi=rY
As a minimum, the required general liability coverages will include:
. Premises Operations
· Blanket Contractual
. Expanded Definition
of Property Damage
Required Limits:
GL1
x
GL2
GL3
GL4
Required Endorsement:
GLXCU
GLLIQ
GLS
.
Prqoucts and Completed Operations
Personal Injury
.
$100,000 per Person; $300,000 per Occurrence
$50,000 Property Dan1age
or
$300,000 Combined Single Limit
$250,000 per Person; $500,000 per Occurrence
$50,000 Property Damage
or
$500,000 Combined Single Limit
$500,000 per Person; $1 ,ooo,oqo per Occurrence
$100,000 Property Damage
or .
$1,000,000 Combined Single Limit
$5,000,000 Combined Single Limit
Underground, Explosion and Collapse (XCU)
Liquor Liability
Security Services
All endorsements are required to have the same limits as the basic policy.
Adrninistrallon Instruction
114709.2
INSCKLST 2
1996 Edilion
VEHICLE LJABI[~'7Y
As a minimum, coverage should extend to liability for:
· Owned; Non-owned; and Hired Vehjcles
Required Limits:
BRl
MVC
PROl
PR02
PR03
POLl
POL2
POL3
EDl
ED2
GKl
GK2
GK3
\lLI X
VLl
VL2
VL3
VL4
x
AdmlnlSlration Instruction
#4709.2
$50,000 per Person: $100,000 per Occurrence
$25,000 Property Damage
or
$100,000 Combined Single Limit
$100,000 per Person; $300,000 per Occurrence
$50,000 Property Damage
or
$300,000 Combined Single Limit
$500,000 per Person; $1,000,000 per Occurrence
$100,000 Property Damage
or
$1,000,000 Combined Single Ljrnit
$5,000,000 Combined Single LiIlfit
MISCELLANEOUS COVERAGES
Builders'
Risk
Limits equal to the
completed project.
Motor Truck
Cargo
Limits equal to the maximum
value of anyone shipment.
Professional
Liability
$ 250,000 per Occurrence/$ 500,000 Agg.
$ 500,000 per Occurrence/$I,OOO,OOO Agg.
$1,000,000 per Occurrence/$2,000,000 Agg.
$ 500,000 per Occurrence/$1 ,000,000 Agg.
$1,000,000 per Occurrence/$2,000,000 Agg.
$5,000,000 per Occurrence/$1 0,000,000 Agg.
$ 10,000
$100,000
Pollution
Liability
Employee
Dishonesty
Garage
Keepers
$ 300,000 ($ 25,000 per Veh)
$ 500,000 ($100,000 per Veh)
$1,000,000 ($250,000 per Veh)
Watercraft Liability $500.000
INSCKLST 3
1996 Edition
INSURANCE AGENTS ST3.TEMENT
I have reviewed the above requirements with the bidder named below. The following deductibles
apply to the corresponding policy.
POLICY
DEDUCTIBLES
Liability policies are _ Occurrence _ Claims Made
Signature
Insurance Agency
BIDDERS STATEMENT
I understand the insurance that will be mandatory if awarded the contract and will comply in full
with all the requirements.
Bidder
Signature
INSCKLST 4
Administration Instruction
#4709.2
1996 Edition
\VORKERS' COMPE~dA"'fION
INSURANCE REQUIREMENTS
FOR
CONTRACT
,
BET\VEEN
MONROE COUNTY, FLORIDA
AND
Prior to the commencement of work governed by this contract, the Contractor shall obtain
Workers' Compensation Insurance 'with limits sufficient to respond to Florida Statute 440.
In addition, the Contractor shall obtain Employers' Liability Insurance v.ith limits of not less
than:
S100,000 Bodily Injury by Accident
S500,000 Bodily Injury by Disease, policy limits
S100,000 Bodily Injury by Disease, each employee
1:
Coverage shall be maintained throughout the entire term of the contract.
Coverage shall be provided by a company or companies authori'zed to transact business in the
state of Florida.
If the Contractor has been approved by the Florida's Department of Labor, as an authorized self-
insurer, the County shall recognize and honor the Contractor's status. The Contractor may be
required to submit a Letter of Authorization issued by the Department of Labor and a Certificate
of Insurance, providing details on the Contractor's Excess Insurance Program.
If the Contractor participates in a self-insurance fund, a Certificate of Insurance will be required.
In addition, the Contractor may be required to submit updated financial statements from the fund
upon request from the County.
wel
Administration Instruction
114709.2
1996 Edition
\\'ORKERS' CO~1rENSA TION
INSURANCE REQUIREMENTS
FOR
CONTRACT
, f
BET\VEEN
MONROE COUNTY, FLORIDA
AND
Recognizing that the work governed by this contract involves Maritime Operations, the Contractor's
Workers' Compensation Insurance Policy shall include coverage for claims subject to the Federal Jones
Act (46 U.S.C.A. subsection 688) with limits not less than those specified for Employer's Liability.
The Contractor shall be permitted to provide Jones Act Coverage through a separate Protection and
Indemnity Policy, in so far as the coverage provided is no less restrictive than would have been provided
by a Workers' Compensation policy. }
WCJA
AdmiOlslrallon Instruction
1/4709 2
1996 Edition
GENERAL LIABH;:TY
INSURANCE REQUIREMENTS
FOR
CONTRACT
I
BET\VEEN
MONROE COUNTY, FLORIDA
AND
Prior to the commencement of work governed by this contract, the Contractor shall obtain
General Liability Insurance. Coverage shall be maintained throughout the life of the contract and
include, as a minimum:
· Premises Operations
· Products and Completed Operations
· Blanket Contractual Liability
· Personal Injury Liability
· Expanded Definition of Property Damage
The minimum limits acceptable shall be:
J:
$300,000 Combined Single Limit (CSL)
If split limits are provided, the minimum limits acceptable shall be:
$100,000 per Person
$300,000 per Occurrence
$ 50,000 Property Damage
An Occurrence Form policy is preferred. If coverage is provided on a Claims Made policy, its
provisions should include coverage for claims filed on or after the effective date of this contract.
In addition, the period for which claims may be reported should extend for a minimum of twelve
(12) months follov.ring the acceptance of work by the County.
The Monroe County Board of County Commissioners shall be named as Additional Insured on
all policies issued to satisfY the above requirements.
GLl
Administration Instruction
#4709.2
1996 Edition
VEHICLE LIABILI1;y' ~
INSURANCE REQUIREMENTS
FOR
CONTRACT
BETWEEN
MONROE COUNTY, FLORIDA
AND
Recognizing that the work governed by this contract requires the use of vehicles, the Contractor,
prior to the commencement of work, shall obtain Vehicle Liability Insurance. Coverage shall be
maintained throughout the life of the contract and include, as a minimum, liability coverage for:
. O\Wed, Non-O\\'I1ed, and Hired Vehicles
The minimum limits acceptable shall be:
$100,000 Combined Single Limit (CSL)
):
If split limits are provided, the minimum limits acceptable shall be:
$ 50,000 per Person
$100,000 per Occurrence
$ 25,000 Property Damage
The Monroe County Board of County Commissioners shall be named as Additional Insured on
all policies issued to satisfy the above requirements.
VLI
AdminislrallOn InslruClIon
Ii 4 709 2
xo
1996 Edition
\V A TER CRAFT LIAB J~~
INSURANCE REQUIREl\~N1'S
FOR
CONTRACT
, ,
BET\\'EEN
MONROE COUNTY, FLORIDA
AND
Prior to the commencement of work governed by this contract; the Contractor shall obtain
Water Craft Liability Insurance with terms no less restrictive than those found in the
standard "American Institute Hull Clauses" (June 2, 1977 edition). Coverage shall be
maintained throughout the life of the contract and include, as a minimum:
· Injwy (including death) to any Person
· Damage to Fixed or Movable Objects
· Costs Associated with the Removal of Wrecked Vessels
· Contractual Liability with Respect to this Contract
If the policy obtained states that coverage applies for the "Acts,or Omissions ofa Vessel",
it shall be endorsed to provide coverage for the legal liability of the shipo\\'I1er.
The minimum limits acceptable shall be:
$500,000 Combined Single Limit (CSL)
Coverage provided by a Protection and Indemnity Club (P~I) shall be subject to the
approval of the County.
The Monroe County Board of County Commissioners shall be named as Additional
Insured on all policies iss~ed to satisfy the above requirements.
WLI
Administration Instruction
1147092