FY2012 - 2013 EXHIBIT H
APPROVED RATE SCHEDULE
Own Reef Club Inc. y .�
FY 2012-2013 Approved Rates Fri
N
Residential Collection Rates(per unit)
Services Curbside Service
cr
0
Solid Waste $13.41 (2x/wk) - ! '�
Recycling $3.24 (lx/wk)
Commercial Solid Waste,Commercial Recycling and Roll-Off Collection Rates
Solid Waste Collection Rate $7.21 per cubic yard
Recycling Container Collection Rate $7.21 per cubic yard
Compactor Collection Rate(12 cubic yards or less) $16.74 per cubic yard
Compactor Collection Rate(greater than 12 cubic yards) $215.32 per pull
Roll-Off Collection Rate $215.32 per pull
MONTHLY CONTAINER MAINTENANCE FEES
CONTAINERS ON-COMPACTING
SIZE cubic : • RATE w/out lockin, mechanism
IYD $17.24
2YD $19.58
3YD $22.01
4YD $22.37
6YD $24.79
SYD $27.22
RECYCLING CONTAINERS
32 gal. $1.61
90 gal. $4.46
Capacities in between these values can be obtained by interpolation.
Capacities outside of these values can be obtained by extrapolation.
0Ce�. RgJ
EXHIBIT V
Special Services
FY 2012-2013 Approved Rates
RATES DETERMINED BY FRANCHISOR
Rolling Out Container(and returning it to $3.69
original location)
Back Door Service(Residential Curbside Only)* Negotiable
Opening(and closing)Doors or Gates $1.22
Locks for Containers $12.29 (one time)
Charge for Replacement based on Cost+ 10%
Unlocking Containers $1.66
Supplying(and retrofitting)locking $73.92
Mechanism on container"
Adding wheels to or changing wheels No Charge
on 1,2,and 3 yard Containers only
Moving Container Location(if
Feasible)Pet Customer Request $30.79
Adding lids to or changing lids on
Containers No Charge
Set up and Return Fees $36.96
Credit Card Convenience Fee
Not to exceed fee charged
by customer's credit card company
Over the Lid Service $13.60 minimum,up to
$30.87 maximum,depending on level of service
- 'There will be no charge for those residents medically unable to bring solid waste or
recyclables to curbside as delineated in Section 4. Back door service to all other .- -n
customers may be offered by the Franchisee.
PI
**Determination of necessity of locking mechanisms is based on customer v m
requirements."
a_ 7J
n
n
09.19.12
� C7