FY2014 - 2015 EXHIBIT II
APPROVED RATE SCHEDULE
Ocean Reef Club Inc.
FY 2014-2015 Approved Rates
Residential Collection Rates(per unit)(No CPI)
Services Curbside Service
Solid Waste $13.68 (2x/wk)
Recycling $3.30 (lx/wk)
Commercial Solid Waste,Commercial Recycling and Roll-Off Collection Rates(CPI 1.1%)
Solid Waste Collection Rate $7.43 per cubic yard
Recycling Container Collection Rate $7.43per cubic yard
Compactor Collection Rate(12 cubic yards or less) $17.26 per cubic yard
Compactor Collection Rate(greater than 12 cubic yards) $222.05 per pull
Roll-Off Collection Rate $222.05 per pull
MONTHLY CONTAINER MAINTENANCE FEES(CPI.1.1%)
CONTAINERS (NON-COMPACTING)
SIZE(cubic yards) RATE w/out locking mechanism
IYD $17.77
2YD $20.19
3YD $22.70
4YD $23.07
6YD $25.57
8YD $28.07
RECYCLING CONTAINERS
32 gal. $1.66
90 gal. $4.60
Capacities in between these values can be obtained by interpolation.
Capacities outside of these values can be obtained by extrapolation.
EXHIBIT V
Special Services — Ocean Reef
FY 2014-2015 Approved Rates
RATES DETERMINED BY FRANCHISOR (CPI 1.1 -0514)
Rolling Out Container(and returning it to $3.80
original location)
Back Door Service(Residential Curbside Only)" Negotiable
Opening(and closing)Doors or Gates $1.25
Locks for Containers $25.00 (one time)
Charge for Replacement based on Cost+ 10%
Unlocking Containers $1.71
Supplying(and retrofitting) locking $76.23
Mechanism on container"
Adding wheels to or changing wheels No Charge
on 1,2,and 3 yard Containers only
Moving Container Location(if
Feasible)Per Customer Request $31.76
Adding lids to or changing lids on
Containers No Char e
Set up and Return Fees $38.11
Credit Card Convenience Fee
Not to exceed fee charged
by customer's credit card company
Over the Lid Service To be charged by the yard at the current
collection and disposal rate.
"There will be no charge for those residents medically unable to bring solid waste or
recyclables to curbside as delineated in Section 4. Back door service to all other
customers may be offered by the Franchisee.
**Determination of necessity of locking mechanisms is based on customer
requirements."
09.17.14